PBS-24-202P/212P Pedal Foot Switch

    • Rating: 3A 250VAC/6A 125VAC
    • Body Color: Black
    • LED Voltage: /
    • LED Color: /
    • Switch Function: ON-ON/ON-(ON)
    • Operating Temperature: -25℃~+85℃
    • Operating Force: ≤0.25N
    • Installation Mode: PCB Terminal
    • Panel Mount Size: 12mm
    • LED Life: /
    • Electrical Life: 50.000 Cycles
    • Mechanical Life: 250,000 Cycles
    • Contact Resistance: ≤50mΩ
    • Insulation Resistance: ≥1000mΩ
    • Dielectric Strength: 1500VACmin
    • OEM or ODM: Available

Pedal Foot Switch

A pedal foot switch is a switch that controls the on and off of a circuit by stepping on or stepping on it. It is used in a control circuit that cannot be touched by both hands to replace both hands to achieve the purpose of the operation. The operation circuit is turned on and off by stepping on or stepping on it, and it can also be used to control the output current.

Precautions

According to the nature of the load and the current value, please pay attention to the rated load of the product. Please pay attention to the short-circuit and open-circuit of internal wiring during transportation and movement. Please pay attention to the protection level of the pedal foot switch when using it in places with a lot of water, oil, dust, etc. Heavy pressure and impact are the direct causes of product damage, so please be careful when using it.

BITUO provides the fantastic foot pedal switch, it can also be used to control the output current. Foot switch is a kind of on-off switch that controls the circuit by stepping on or stepping on it. It is used in the control circuit that can’t be touched by both hands to achieve the purpose of operation instead of both hands!

A special replacement Pedal Foot Switch for pedals and effects boxes. Modify your effects for true bypass and even wire a status indicator LED.

For pedals and effects!
Ever notice how a wah-wah and other vintage-style effects color your sound and mess with the tone of your other pedals, even when turned off? That’s because many guitar effects aren’t wired for a true bypass. This will muddy your tone, and cause other effects in the signal chain to lose volume.

Use this special triple double-throw 9-lug footswitch to rewire vintage pedals or effects boxes. It allows unbuffered bypassing of the effect circuit without coloring the tone of the instrument or other components in the signal chain. The third pole can be wired to control an LED status light or other custom function. This is useful for stage performers, as it leaves no question if the “box” is on or off.

As to the mounting dimension, at least 1″ (25.4mm) depth and a 1/2″-diameter (12.70mm) mounting hole are required. The threaded portion is 7/16″ (11.11mm) tall. Contact us for the Pedal Foot Switch now!

Pedal Foot Switch PBS-24-202P PBS-24-212P

PBS-24-202P PBS-24-212P is Pedal Foot Switch. This switch uses a soft operating force button. Latching or momentary are available for this switch. Soild material and fantastic workmanship are the biggest advantage. Besides, it uses PCB terminals for quick and easy installation.

All advantages of the pedal switch can’t be described in a few words, but they are more and more popular all over the world. Furthermore, We provide our product based on the factory price. Please contact us freely for your best quote now!

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Ask your question or briefly describe the situation. we will contact you very quickly