50mA 12VDC Tactile Switch for PCBs and Control Panels
The BTT-A06P2-7.3F is a tactile switch rated 50mA at 12VDC, with a 7.3mm black button and a 6x6mm PCB footprint. It fits control panels, handheld devices and small appliances where a short, firm press is enough.
A 250±50gf operating force gives a clear click without a heavy push. The switch is rated for 50,000 electrical cycles and works from -30°C to +70°C, so it suits both indoor equipment and outdoor housings.
Key Features
50mA at 12VDC contact rating
7.3mm black button height
6x6mm PCB footprint
250±50gf operating force
50,000 electrical cycles
Operating range -30°C to +70°C
PCB terminals for direct soldering
Customization and OEM
Button height and button color can be changed for volume orders. We support OEM and ODM projects and supply samples for testing. Send your drawing or target specification through our contact page and our team will reply within 24 hours.
Specifications
Parameter
Value
Model
BTT-A06P2-7.3F
Rated Current / Voltage
50mA 12VDC
Button Height
7.3mm
Footprint
6×6mm PCB
Operating Force
250±50gf
Electrical Life
50,000 Cycles
Operating Temperature
-30℃ ~ +70℃
Terminal Type
PCB Terminals
OEM / ODM
Available
Applications
The BTT-A06P2-7.3F tactile switch is made for boards that need a short, quiet press with clear feedback. Rated 50mA at 12VDC, it has a 7.3mm black button, a 6x6mm footprint, and a 50,000 cycle life.
Keyboards and keypads
Remote controls and handheld devices
Control panels and interface boards
Consumer electronics
Instrument and measurement panels
Custom panel builds and OEM equipment
Contact BITUO for a tactile switch quote today. Send your drawing or target specification, our team replies within 24 hours.
FAQ
This tactile switch is rated 50mA at 12VDC. It is built for signal-level switching in keyboards, remotes, and control panels.
The tactile switch has a 7.3mm black button. The raised button gives a clear press surface above the board.
It has a 6x6mm PCB footprint. The compact size suits dense boards and multi-key layouts.
The tactile switch needs 250±50gf to actuate. The firm click gives clear feedback so operators know the press registered.
The switch is rated for 50,000 cycles. It stays reliable through long-term daily use.
The tactile switch runs from -30°C to +70°C. It works across cold storage and warm indoor devices.
BTT-003A is Small Tactile Switch. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses smd terminals for quick and easy installation.
BTT-003B is Micro Push Button Switch 2 Pin. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses smd terminals for quick and easy installation.
BTT-003C is SPST Tactile Switch. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses PCB terminals for quick and easy installation.
BTT-003D is Tact Switch Smd. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses SMD terminals for quick and easy installation.
BTT-003E is Tact Button. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses PCB terminals for quick and easy installation.
BTT-003L is Spst Momentary Tactile Switch. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses PCB terminals for quick and easy installation.
BTT-003P is Silicone Tactile Switch. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses PCB terminals for quick and easy installation.
BTT-004A is Tactile Button. These switches is 50mA 12VDC offering a variety of dimension and button height. Besides, it uses SMD terminals for quick and easy installation.