bituoelec > Guitar Pedal Parts > Pedal Switch > PBS-24-402/412 Guitar Pedal Switch

PBS-24-402/412 Guitar Pedal Switch

- Rating: 3A 250VAC/6A 125VAC
- Body Color: Black
- LED Voltage: /
- LED Color: /
- Switch Function: ON-ON/ON-(ON)
- Operating Temperature: -25℃~+85℃
- Operating Force: ≤0.25N
- Installation Mode: Solder Terminal

- Panel Mount Size: 12mm
- LED Life: /
- Electrical Life: 50.000 Cycles
- Mechanical Life: 250,000 Cycles
- Contact Resistance: ≤50mΩ
- Insulation Resistance: ≥1000mΩ
- Dielectric Strength: 1500VACmin
- OEM or ODM: Available

Guitar Pedal Switch

Guitar Pedal Switch is a kind of switch with moving contact knife switch and wedging (or separating) the fixed contact knife holder on the base to make (or break) the circuit. The switch can be used to isolate the power supply to ensure the safety of circuit and equipment maintenance. It can also be used to make and break loads below rated current infrequently. Guitar Pedal Switch can break the load, such as turning on and breaking the low-voltage circuit with small capacity infrequently or starting the small capacity motor directly.

Inquiry Now

Download Catalogue Blueprint

Category: Pedal Switch

BITUO provides the fantastic foot pedal switch, it can also be used to control the output current. Foot switch is a kind of on-off switch that controls the circuit by stepping on or stepping on it. It is used in the control circuit that can’t be touched by both hands to achieve the purpose of operation instead of both hands!

A special replacement 4PDT Switch for pedals and effects boxes. Modify your effects for true bypass and even wire a status indicator LED.

For pedals and effects!
Ever notice how a wah-wah and other vintage-style effects color your sound and mess with the tone of your other pedals, even when turned off? That’s because many guitar effects aren’t wired for a true bypass. This will muddy your tone, and cause other effects in the signal chain to lose volume.

Use this special triple double-throw 9-lug footswitch to rewire vintage pedals or effects boxes. It allows unbuffered bypassing of the effect circuit without coloring the tone of the instrument or other components in the signal chain. The third pole can be wired to control an LED status light or other custom function. This is useful for stage performers, as it leaves no question if the “box” is on or off.

As to the mounting dimension, at least 1″ (25.4mm) depth and a 1/2″-diameter (12.70mm) mounting hole are required. The threaded portion is 7/16″ (11.11mm) tall. Contact us for the 4PDT Switch now!

Guitar Pedal Switch PBS-24-402 PBS-24-412

PBS-24-402 PBS-24-412 is Guitar Pedal Switch. This switch uses a soft operating force button. Latching or momentary are available for this switch. Soild material and fantastic workmanship are the biggest advantage. Besides, it uses solder terminals for quick and easy installation.

All advantages of the pedal switch can’t be described in a few words, but they are more and more popular all over the world. Furthermore, We provide our product based on the factory price. Please contact us freely for your best quote now!