The MTS-102/103R SPDT toggle switch can handle 6A 125VAC or 3A 250VAC. The switch terminals are solder type and have an operating temperature range of -25℃ to +85℃ degrees Celsius.
Dielectric strength is 1500VAC minimum and electrical life is 10,000 cycles. The contact resistance is less than 20 milliohms, and the insulation resistance is greater than 1000 megohms. Accept OEM or ODM orders
SPDT Toggle Switch for Control and Signal Circuits
The MTS-102/103R is an SPDT toggle switch with three terminals and an ON-ON or ON-OFF-ON function. The lever gives a firm click at each position, and the 6mm panel bushing drops into the standard hole used on guitars, pedals and small control panels.
Contacts are rated 6A at 125VAC and 3A at 250VAC, with 1500VAC dielectric strength and a 10,000 cycle electrical life. Solder terminals keep the wiring short and firm, and the metal frame holds its position after repeated switching.
Key Features
SPDT, three terminals
ON-ON or ON-OFF-ON function
6A 125VAC and 3A 250VAC rating
1500VACmin dielectric strength
6mm panel mount bushing
10,000 electrical cycles
Solder terminals
Customization and OEM
Lever length, bushing thread and terminal type can be made to your drawing. We support OEM and ODM orders and can send samples for testing before production.
Specifications
Parameter
Value
Model
MTS-102/103R
Rated Current / Voltage
6A 125VAC / 3A 250VAC
Function
SPDT (ON-ON)
Insulation Resistance
≥1000MΩ (500VDC)
Contact Resistance
≤20mΩ
Dielectric Strength
1500VAC / 1 minute
Operating Temperature
-25℃ ~ +85℃
Electrical Life
10,000 Cycles
Panel Mount
φ6mm
Terminal Type
Solder Terminals
OEM / ODM
Available
Applications
The MTS-102/103R SPDT toggle switch is made for control and signal circuits that need a lever-operated selector. Rated 6A at 125VAC and 3A at 250VAC, it has ON-ON or ON-OFF-ON action and mounts through a 6mm bushing with solder terminals.
Control panels and signal switching
Test and measurement equipment
Audio and instrument wiring
Low-current power circuits
Industrial and lab equipment
Custom panel builds and OEM equipment
Contact BITUO for an SPDT toggle switch quote today. Send your drawing or target specification, our team replies within 24 hours.
FAQ
This SPDT toggle switch is rated 6A at 125VAC and 3A at 250VAC. It suits low-current signal, control, and small power circuits.
The MTS-102/103R is an SPDT toggle switch with ON-ON or ON-OFF-ON action. One common contact routes to either of two outputs, giving three terminals in total.
The SPDT toggle switch has three terminals, one common and two positions. Solder lugs make wiring quick and secure.
It mounts through a 6mm bushing. The threaded bushing locks the toggle switch to the panel with a nut and washer.
The SPDT toggle switch uses solder terminals. Solder lugs accept wire directly and hold firmly through vibration.
The switch is rated for 10,000 cycles. That covers years of normal use in control panels and test equipment.
MTS-2033 is 3 Way Toggle Switch Guitar. This switch with 6 terminals and uses an operability handle that offering special ON-ON-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-112R MTS-113R MTS-123R is 2 Way Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON) function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-102-A2 MTS-103-A2 is Mini Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses PCB terminals for quick and easy installation.
MTS-112-A2 MTS-113-A2 MTS-123-A2 is Momentary Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON) function. It is widely using for guitar pedal parts. Besides, it uses PCB terminals for quick and easy installation.
MTS-102-C2 MTS-103-C2 is Mini Toggle Switch Guitar. This switch with three angle terminals and uses an operability short handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses PCB terminals for quick and easy installation.
MTS-102-L1 MTS-103-L1 is Toggle Switch Dimmer. This switch with three terminals and uses a big operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-202-F1 MTS-203-F1 is Double Pole Toggle Switch. This switch with three terminals and uses a metal flat operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-202R MTS-203R is DPDT Toggle Switch. This switch with six terminals and uses an operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.