The MTS-202/203R is a DPDT toggle switch with six terminals and an ON-ON or ON-OFF-ON function. One lever switches two circuits at the same time, which suits guitar pedals, amp footswitches and panel builds that need a changeover contact.
The switch is rated 6A at 125VAC and 3A at 250VAC, with 1500VAC dielectric strength and a 10,000 cycle electrical life. It mounts through a 6mm panel hole and takes solder wiring on both rows of terminals.
Key Features
DPDT, six terminals
ON-ON or ON-OFF-ON function
Two circuits switched from one lever
6A 125VAC and 3A 250VAC rating
1500VACmin dielectric strength
6mm panel mount bushing
10,000 electrical cycles
Solder terminals
Customization and OEM
Actuator length, bushing and terminal options are open to your specification. Send us a drawing for an OEM or ODM quote, and we can supply samples for evaluation.
Specifications
Parameter
Value
Model
MTS-202/203R
Rated Current / Voltage
6A 125VAC / 3A 250VAC
Function
DPDT (ON-ON)
Insulation Resistance
≥1000MΩ (500VDC)
Contact Resistance
≤20mΩ
Dielectric Strength
1500VAC / 1 minute
Operating Temperature
-25℃ ~ +85℃
Electrical Life
10,000 Cycles
Panel Mount
φ6mm
Terminal Type
Solder Terminals
OEM / ODM
Available
Applications
The MTS-202/203R DPDT toggle switch is made for equipment that switches two circuits from one lever, such as reversing motors or routing signals. It is rated 6A at 125VAC and 3A at 250VAC with six terminals and mounts through a 6mm bushing.
Motor reversing and direction control
Signal routing and polarity switching
Audio and instrument circuits
Test and measurement equipment
Control panels and small machinery
Custom panel builds and OEM equipment
Contact BITUO for a DPDT toggle switch quote today. Send your drawing or target specification, our team replies within 24 hours.
FAQ
DPDT means Double Pole Double Throw, so this DPDT toggle switch has six terminals and switches two circuits at once. It is the standard choice for reversing motors and switching signal paths.
The DPDT toggle switch offers ON-ON or ON-OFF-ON action. Each position routes both poles together, so the two circuits stay in sync.
This DPDT toggle switch is rated 6A at 125VAC and 3A at 250VAC. It suits low-current control and signal circuits.
It mounts through a 6mm bushing. The threaded bushing locks the switch in place with a nut.
The DPDT toggle switch uses solder terminals for direct wire connection. Solder lugs hold firmly under vibration.
Yes, samples of the DPDT toggle switch are available for evaluation. You can check fit, feel, and switching before ordering.
MTS-2033 is 3 Way Toggle Switch Guitar. This switch with 6 terminals and uses an operability handle that offering special ON-ON-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-102R MTS-103R is SPDT Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-112R MTS-113R MTS-123R is 2 Way Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON) function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-102-A2 MTS-103-A2 is Mini Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses PCB terminals for quick and easy installation.
MTS-112-A2 MTS-113-A2 MTS-123-A2 is Momentary Toggle Switch. This switch with three terminals and uses an operability handle that offering ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON) function. It is widely using for guitar pedal parts. Besides, it uses PCB terminals for quick and easy installation.
MTS-102-C2 MTS-103-C2 is Mini Toggle Switch Guitar. This switch with three angle terminals and uses an operability short handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses PCB terminals for quick and easy installation.
MTS-102-L1 MTS-103-L1 is Toggle Switch Dimmer. This switch with three terminals and uses a big operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.
MTS-202-F1 MTS-203-F1 is Double Pole Toggle Switch. This switch with three terminals and uses a metal flat operability handle that offering ON-ON or ON-OFF-ON function. It is widely using for guitar pedal parts. Besides, it uses solder terminals for quick and easy installation.