Month: March 2020

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-OFF or OFF-(ON)
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

Switchcraft Toggle Switch

The Switchcraft Toggle Switch is to switch on or off the circuit by turning the switch handle, so as to achieve the purpose of switching the circuit. The commonly used varieties of toggle switch include single pole double position, single pole three position, double pole double position and double pole three position, etc. It is generally used in low-voltage circuit, with the characteristics of flexible sliding block action and stable and reliable performance.

The 4 pin toggle switch is mainly used in various instruments / instrument equipment, various electric toys, fax machines, audio equipment, medical equipment, beauty equipment, and other electronic product fields.

The working principle of the four bit switch is a multi bit BCD code toggle switch. There is a circuit board for each switch in it. The BCD code is generated by the printed circuit pattern. The corresponding BCD code is output by the four pins under each switch.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-OFF or OFF-(ON)
  • Terminal Type: Solder Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

Double Pole Double Throw Toggle Switch

In order to achieve better positioning effect, the Double Pole Double Throw Toggle Switch is equipped with spring steel balls on both sides of the slide block, and the shell is provided with positioning holes matching with the spring steel balls. Since two spring steel balls are set, if you want to toggle the sliding block, you need to exert greater force on the switch handle to drive the sliding block to slide.

The double pole toggle switch can avoid the phenomenon of false opening, and can still ensure the safety of the bipolar switch in use.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

6 Pin Toggle Switch

The 6 pin toggle switch is a kind of switch with simple structure; it is a switch that changes the contact working state (on and off) by using the toggle lever. It is widely used.

It is characterized by stable performance, convenient use and low cost. It can be used to cut off and connect the power supply, and also can be used to change the gear of the recording system.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON)
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

20 amp Toggle Switch

The 20 amp Toggle Switch is mainly assembled by the following parts after corresponding process treatment:

1. Iron shell (material: generally iron; treatment process: nickel plating or black pot process to prevent oxidation)

2. Plastic handle (material: generally POM material, PA nylon material is often used if there is fire retardant, flame retardant and high temperature resistant requirements; processing technology: injection molding)

3. Terminal (material: generally phosphor copper; treatment process: electroplated silver)

4. Insulating base plate (material: electric board; processing technology: stamping forming)

5. Contact chip (material: generally phosphor copper; treatment process: electroplated silver)

6. Round bead (material: generally stainless steel; treatment process: electroplated nickel)

7. Catapult (material: bronze; processing technology: Stamping)

8. Decorative oil (material: a kind of red oil or green oil chemical oil, which is applied on the contact part between the terminal and the base plate to play a decorative role. General requirements: non toxic, environmental protection)

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Solder Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

2 Position Toggle Switch

1. Be careful with chemicals

Since synthetic resin such as polycarbonate is used in the bottom plate of the medium toggle switch, it is necessary to avoid exposing the potentiometer to the strong atmosphere of chemical substances such as ammonia, amine, alkali solution, alkane, ketone, ester, halohydrocarbon, etc.

2. Use flux carefully

The use of water-soluble flux should be avoided when soldering, otherwise it will have adverse effects on the metal and other materials that constitute the medium toggle switch.

3. Solder

Wiring design and soldering method should avoid causing the molten tin to flow to the surface of PC board, which will cause poor contact.

4. Low temperature operation

When the product is used in low temperature environment, such as car radio or car stereo in cold belt, our company provides comfortable products according to customers’ requirements. Please explain when ordering.

5. Sliding handle length

The shorter the length is, the better (at least 5mm). Under the condition that the width a of the sliding handle is constant, the shorter the sliding handle length is, the better the hand feeling is; the higher the output point is, the worse the hand feeling is.

6. Drive arm

Do not keep the operating point away from the center line of the sliding handle. For the same reason, the shorter the distance b, the better.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON)
  • Terminal Type: Solder Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

Spring Loaded Toggle Switch

Spring Loaded Toggle Switch refers to the on state only when the button is pressed. When the hand leaves the button, it will immediately return to its original position (return to off state), also known as self reset toggle switch.

This switch is used in the button to move the lifting ring and determine the position. At the same time, in addition to this, the buzzer of the special line car only needs to press the button once for one action, which is the switch of this instantaneous action mode.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

How to Ensure Carling Toggle Switch?

1. Solder: the wiring design and soldering method should avoid causing the molten tin to flow to the surface of PC board, which will cause poor contact.

2. Careful use of flux: avoid using water-soluble flux when soldering tin, otherwise it will have adverse effects on the metal and other materials that constitute the safety toggle switch.

3. Length of sliding handle: the shorter the length, the better. Under the condition that the width a of sliding handle is constant, the shorter the length of sliding handle is, the better the handle feeling is. In addition, the higher the output point is, the worse the handle is.

4. Low temperature work: when the safety toggle switch is used in low temperature environment, such as car radio or car stereo in cold belt, our company provides comfortable products according to customers’ requirements. Please explain when ordering.

5. Careful use of chemicals: since synthetic resins such as polycarbonate are used in the bottom plate of the toggle switch, it is necessary to avoid exposing the potentiometer to the strong atmosphere of ammonia, amine, alkali solution, alkane, ketone, ester, halohydrocarbon and other chemicals.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-(ON) or ON-OFF-(ON) or (ON)-OFF-(ON)
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

2 Pole Toggle Switch

The 2 Pole Toggle Switch is actually composed of two SPDT switches in parallel, and its wiring mode is exactly the same as that of each SPDT.

The two knives are connected by an insulating plastic and share a handle. Each side of the DPDT toggle switch is equivalent to one SPDT Switch, which can be used as two SPDT switches; two adjacent terminals on the same side of the DPDT switch are equivalent to one SPDT Switch and can be used as four SPDT switches.

Due to the different connection modes of a ‘, B’, a and B, the double pole double throw switch will have different functions, such as changing the direction of current or voltage, exchanging the position of electrical components, etc.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

Switchcraft 3 Way Toggle

The Switchcraft 3 Way Toggle has low, medium and high capacity models.
The switch design features a robust construction with a high torque bushing and a galvanized steel cover. These switches are designed to withstand harsh environments. The full range of switches has PC board and panel mounting options, a full range of actuators and terminal styles to meet any application

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Solder Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

3 Pole Toggle Switch

3 Pole Toggle Switch are often used to control heavy equipment, such as cranes, conveyor belts and heavy material handling equipment. This kind of switch is sometimes used in combination with control limit switch, which is usually used as backup protection of control limit switch. Once the control limit switch fails, or the contactor is stuck or fused, the switch will disconnect the power supply of motor.

The contact of limit switch is connected in series with the contact of main contactor. Therefore, the limit switch can effectively avoid damage or accident caused by overhead crane or other heavy material handling equipment, or mechanical over travel.

The difference between ordinary limit switch and heavy duty switch is that the former is applied to control circuit, while the latter is applied to power supply circuit. The action of switch will cut off the power supply of motor. The switch needs at least two normally closed contacts to disconnect the two-phase circuit of the motor.

The heavy duty switch has both lever type and rotary cam type. Its structure is firm. The rated value of contact current is the same as that of the motor. If the value is too high, arc extinguishing device will be provided at the contact.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Screw Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

4 Position Toggle Switch

The 4 Position Toggle Switch is easy to install in a housing and has a long metal handle to switch between the three options. With a total of 12 pins, you can control up to 4 things all from one switch!

The 4 Position Toggle Switch has 4 Poles and is Four Pole Double Throw (4PDT) which means that when you slide the switch to the up position, the top and middle poles for all 4 columns get connected, when you slide the switch to the center position all pins are disconnected (OFF), and when you slide the switch to the down position, the bottom and middle poles of all 4 columns get connected.

Very convenient in circuits because you can not only use it as quadruple ON/OFF switch by connecting the middle and the top or the middle and the bottom poles of each vertical column to your circuits, but also as a toggle switch connecting the middle pole to the top and the middle pole to the bottom when you flip it up and down respectively.

• • Rating: 20A 125VAC/15A 250VAC
  • Switch Function: ON-ON or ON-OFF-ON
  • Terminal Type: Solder Terminal
  • Operating Temperature: -25℃~+85℃
  • Dielectric Strength: 1500VACmin

• • Panel Mount Size: 12mm
  • Electrical Life: 10,000 Cycles
  • Contact Resistance: ≤50mΩ
  • Insulation Resistance: ≥1000mΩ
  • OEM or ODM: Available

4PDT Switch

The 4PDT Switch is usually formed by processing and assembling each part of the switch. In order to prevent its oxidation, the iron shell should be treated by nickel plating and black pot process. Plastic handle is usually made of POM material.

The bottom plate is made of electroplated wood, and the round bead is generally made of stainless steel. It is treated by electroplated nickel plating. The decorative oil is a kind of red oil and green oil chemical oil. It is applied on the contact part between the terminal and the base plate to play a decorative role. They are usually non-toxic and environmentally friendly.

4PDT Switch is widely used in digital products, such as digital cameras, digital cameras, etc.; in communication products, there are mobile phones and telephones; in computer products, there are cameras; in fitness equipment, there are electronic body fat scales, treadmills, etc. Others can also be used for security products, toys.